Satellite Motor SaTracer with DiSEq C1,2 GTX positioner.

A new-generation motor with DiSEqC™ 1.2 compatible positioner
• Smart control via “Go To X” function - without programming
• Controlled via single coaxial cable
• Suitable for dishes up to 1.4 m (aluminum)
• Aluminum housing
• Motor rotation up to 95° (min)
• Silent operation
• Fast rotation
• Option of controlling via two keys on the motor
• Features LED diode - review about status of motor (errors, receiving/sending DiSEqC commands, switch to second dish)
• Can be used in all type of climate
• Simple installation (even for unskilled persons)
• Powerful “polarmount” construction for ideal tracking of TV satellites from the geostationary orbit
• Developed and produced in Europe

On the platform of the 3 series the SW is built around the revolutionary feature - an integrated DiSEqC switch!
• Can switch between two LNBs (i.e.: H/V and R/L) on the same dish (with automatical movement of the other LNB into focus)
• Option for receiving same satellite with all polarisations
• Switch can also be used for switching between a motorized and fixed dish or 2 fixed dishes
• Supports ALL DiSEqC protocols (also DiSEqC 2.2 with reply message)

Technical data
Operating protocol: DiSEqC™1.2 level + Go To X function
Horizontal turning: 95° min.
Inclination (elevation): 75° max.
Maximum dish diameter: ø 140 cm Alu.
Programmable positions: 50 satellites
Maximum dish weight: 12 kg for normal operation
Motor pole length (strait part): 120 mm
Bent pole diameter: ø 40 mm
Rotation Speed (no load): 2,5°/s (H-18V) 2°/s (V-14V) ±25%
Rotation Speed (by load 85 cm dish) : 2,3°/s (H-18V) 1,7°/s (V-14V) ±25%
Operating power supply: 14/18V DC
Stand-by consumption: 15 mA ±25%
Operating consumption by 85cm dish: 95-150 mA ±25%
Starting (max.) consumption: 350 mA (80mS)
Operating temperature: -25°C +70°C
Min. and max. relative humidity: 35% to 100%
Connectors: F type 7 mm
Connections: sat coaxial cable 75Ω impedance
Connection cable up to 30m: inner conductor CU Ø 1,02mm R=22Ω/km+
Connection cable up to 100m: inner conductor CU Ø 1,13mm R=18Ω/km
EAST-WEST limits: hardware fixed, software programmable
Fine tuning step: 0,36° min.
Maximum permissible wind speed At 85 cm / 140 cm dish: 140 km/h / 80 km/h
Maximum permissible torque at rotation: 15 Nm
Maximum static torque on idle: 150 Nm
Control buttons on motor: 2 for turning motor E/W
Dimension of packed into box: 295 (L) x 132 (W) x 155 (H) mm
Weight with box: 2,70 kg
Lifetime min.: 50.000 cycles per 180° (90°E + 90°W)